| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Truss rod length and installation http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=56838 |
Page 1 of 1 |
| Author: | Juergen [ Sat Oct 19, 2024 9:22 am ] |
| Post subject: | Truss rod length and installation |
Recently I`ve seen a YouTube video fro a german luthier who build a comissioned steel string guitar. The truss rod nearly reached the soundhole and was not embedded in the neck block extension for nearly 5 cm. The guitar was a dread. Is the length of the truss rod determined for a correct action of the rod, or doesn`t it matter? Robbie O`Brian places his truss rods with the moving parts beginning at the neck-body-joint. How do you install your truss rods? Juergen |
|
| Author: | Hesh [ Sun Oct 20, 2024 3:44 am ] |
| Post subject: | Re: Truss rod length and installation |
Hi Juergen I was like Robbie with the rod only effective from the 1st fret to the body joint. That's how they are all in my experience. |
|
| Author: | Bob Orr [ Sun Oct 20, 2024 9:00 am ] |
| Post subject: | Re: Truss rod length and installation |
I stop mine at the head block too. |
|
| Author: | Michaeldc [ Sun Oct 20, 2024 10:18 am ] |
| Post subject: | Re: Truss rod length and installation |
Bob Orr wrote: I stop mine at the head block too. I'm assuming this is for headstock access and not sound hole access? |
|
| Author: | Kbore [ Sun Oct 20, 2024 1:47 pm ] |
| Post subject: | Re: Truss rod length and installation |
I stop my truss rods at the tenon of the heel block, with access from the sound hole, and extending to between the first fret and nut. THats how I built my first guitar, and subsequent ones. |
|
| Author: | SteveSmith [ Sun Oct 20, 2024 1:53 pm ] |
| Post subject: | Re: Truss rod length and installation |
Kbore wrote: I stop my truss rods at the tenon of the heel block, with access from the sound hole, and extending to between the first fret and nut. THats how I built my first guitar, and subsequent ones. Yep. |
|
| Author: | J De Rocher [ Sun Oct 20, 2024 3:14 pm ] |
| Post subject: | Re: Truss rod length and installation |
SteveSmith wrote: Kbore wrote: I stop my truss rods at the tenon of the heel block, with access from the sound hole, and extending to between the first fret and nut. THats how I built my first guitar, and subsequent ones. Yep. Same here. The threaded block at the nut end of the rod rests on top of the tenon just past the neck/body joint. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|